A new principle in design of composite materials: reinforcement by interlocked elementsDYSKIN, A. V; ESTRIN, Y; KANEL-BELOV, A. J et al.Composites science and technology. 2003, Vol 63, Num 3-4, pp 483-491, issn 0266-3538, 9 p.Conference Paper

Brittle matrix composites with heterogeneous reinforcement: Multi-scale model of a crack bridge with rigid matrixRYPL, R; CHUDOBA, R; SCHOLZEN, A et al.Composites science and technology. 2013, Vol 89, pp 98-109, issn 0266-3538, 12 p.Article

Aluminum matrix composites based on preceramic-polymer-bonded SiC preformsTHÜNEMANN, Maik; BEFFORT, Olivier; KLEINER, Simon et al.Composites science and technology. 2007, Vol 67, Num 11-12, pp 2377-2383, issn 0266-3538, 7 p.Article

Mechanical properties of aligned multi-walled carbon nanotube/epoxy composites processed using a hot-melt prepreg methodOGASAWARA, Toshio; MOON, Sook-Young; INOUE, Yoku et al.Composites science and technology. 2011, Vol 71, Num 16, pp 1826-1833, issn 0266-3538, 8 p.Article

Novel carbon nanotube array-reinforced laminated composite materials with higher interlaminar elastic propertiesABUT, J. L; SONG, Y; SCHULZ, M. J et al.Composites science and technology. 2008, Vol 68, Num 13, pp 2755-2760, issn 0266-3538, 6 p.Article

Dynamic tensile behaviour at low temperature of CFRP using a split Hopkinson pressure barGOMEZ-DEL RIO, T; BARBERO, E; ZAERA, R et al.Composites science and technology. 2005, Vol 65, Num 1, pp 61-71, issn 0266-3538, 11 p.Article

Characteristics of powder metallurgy pure titanium matrix composite reinforced with multi-wall carbon nanotubesKONDOH, Katsuyoshi; THRERUJIRAPAPONG, Thotsaphon; IMAI, Hisashi et al.Composites science and technology. 2009, Vol 69, Num 7-8, pp 1077-1081, issn 0266-3538, 5 p.Article

Mechanical behavior of glass/epoxy tubes under combined static loading. Part I: ExperimentalANTONIOU, Alexandros E; KENSCHE, Christoph; PHILIPPIDIS, Theodore P et al.Composites science and technology. 2009, Vol 69, Num 13, pp 2241-2247, issn 0266-3538, 7 p.Article

Mechanical properties of NBR/clay nanocomposites by using a novel testing systemAHMADI, Seyed Javad; G'SELL, Christian; YUDONG HUANG et al.Composites science and technology. 2009, Vol 69, Num 15-16, pp 2566-2572, issn 0266-3538, 7 p.Article

Ni-Si-C composites with various microstructures via solid state reaction of nickel and silicon carbide particulateFEI GAO; JINJUN LU; WEIMIN LIU et al.Composites science and technology. 2008, Vol 68, Num 2, pp 566-571, issn 0266-3538, 6 p.Article

Experimental methodology of study of damage initiation and development in textile composites in uniaxial tensile testLOMOV, S. V; IVANOV, D. S; TRUONG, T. C et al.Composites science and technology. 2008, Vol 68, Num 12, pp 2340-2349, issn 0266-3538, 10 p.Conference Paper

Mechanical and rheological properties of carbon nanotube-reinforced polyethylene compositesXIAO, K. Q; ZHANG, L. C; ZARUDI, I et al.Composites science and technology. 2007, Vol 67, Num 2, pp 177-182, issn 0266-3538, 6 p.Article

A model for the mechanical response of composites with thermoplastic-elastomer matricesDROZDOV, A. D.Composites science and technology. 2006, Vol 66, Num 15, pp 2648-2663, issn 0266-3538, 16 p.Article

Developments in the characterization of natural fibre properties and in the use of natural fibres for compositesNECHWATAL, Axel; MIECK, Klaus-Peter; REUSSMANN, Thomas et al.Composites science and technology. 2003, Vol 63, Num 9, pp 1273-1279, issn 0266-3538, 7 p.Conference Paper

The reinforcement effect of exfoliated graphene oxide nanoplatelets on the mechanical and viscoelastic properties of natural rubberSTANIER, D. C; PATIL, A. J; SRIWONG, C et al.Composites science and technology. 2014, Vol 95, pp 59-66, issn 0266-3538, 8 p.Article

Ductile deformation mechanisms and designing instructions for integrated woven textile sandwich compositesHUALIN FAN; LONG ZHAO; HAILONG CHEN et al.Composites science and technology. 2012, Vol 72, Num 12, pp 1338-1343, issn 0266-3538, 6 p.Article

Stress-strain behavior of multi-walled carbon nanotube/PEEK compositesOGASAWARA, Toshio; TSUDA, Terumasa; TAKEDA, Nobuo et al.Composites science and technology. 2011, Vol 71, Num 2, pp 73-78, issn 0266-3538, 6 p.Article

Three consistent approaches of the multiple cracking process in 1D compositesCASTELIER, E; GELEBART, L; LACOUR, C et al.Composites science and technology. 2010, Vol 70, Num 15, pp 2146-2153, issn 0266-3538, 8 p.Article

Effects of camber height and boundary condition on energy absorption of arched composite laminatesSCHULZ, Peter J; LIU, Dahsin.Composites science and technology. 2009, Vol 69, Num 6, pp 718-724, issn 0266-3538, 7 p.Article

Mechanisms leading to improved mechanical performance in nanoscale alumina filled epoxySU ZHAO; SCHADLER, Linda S; DUNCAN, Renee et al.Composites science and technology. 2008, Vol 68, Num 14, pp 2965-2975, issn 0266-3538, 11 p.Article

High mechanical performance polyurea/organoclay nanocompositesDONGYU CAI; MO SONG.Composites science and technology. 2014, Vol 103, pp 44-48, issn 0266-3538, 5 p.Article

Load-sharing and Monte Carlo models of defects in a bundle of fibresTUNAK, M; LINKA, A; VOLF, P et al.Composites science and technology. 2009, Vol 69, Num 9, pp 1417-1421, issn 0266-3538, 5 p.Conference Paper

Mechanical and thermal behavior of clay/epoxy nanocompositesYASMIN, A; LUO, J. J; ABOT, J. L et al.Composites science and technology. 2006, Vol 66, Num 14, pp 2415-2422, issn 0266-3538, 8 p.Article

The stress-strain behavior of polymer-nanotube composites from molecular dynamics simulationFRANKLAND, S. J. V; HARIK, V. M; ODEGARD, G. M et al.Composites science and technology. 2003, Vol 63, Num 11, pp 1655-1661, issn 0266-3538, 7 p.Article

Impact response of recycled polypropylene-based composites under a wide range of temperature: Effect of filler content and recyclingWANG, K; ADDIEGO, F; BAHLOULI, N et al.Composites science and technology. 2014, Vol 95, pp 89-99, issn 0266-3538, 11 p.Article